The conga-TCRP1 from congatec is a COM Express Type 6 Compact module built on AMD Ryzen™ AI Embedded P100 Series processors, combining up to 6 Zen5/Zen5c CPU cores, a Radeon™ RDNA™ 3.5 GPU and an XDNA2 NPU delivering up to 50 TOPS for edge AI workloads. The module supports up to 96 GB DDR5-5600 memory […]
QLC UFS 4.1 embedded flash enables higher-capacity mobile storage
The QLC UFS 4.1 embedded memory devices from KIOXIA America, Inc. are based on 8th generation BiCS FLASH™ 3D technology, using 4-bit-per-cell QLC to deliver higher storage density in JEDEC®-standard packages. Available in 512 GB and 1 TB capacities, the devices support the UFS 4.1 specification and provide higher sequential and random performance compared to […]
Expandable edge computer adds dockable PCIe module support
The NDiS B340 from NEXCOM is a fanless edge computer based on low-power Intel platforms including Amston Lake X series, Intel N97 and Intel Processor N150, designed with a dockable PCIe expansion option for scalable edge deployments. The system supports dual HDMI 2.0 4K@60Hz outputs, dual 2.5GbE LAN, rich industrial I/O and optional PCIe x4 […]
Low-power MCUs support 5 V operation and advanced peripherals
The PIC32CM PL10 MCUs from Microchip Technology are Arm® Cortex®-M0+–based microcontrollers featuring 5V operation, Core Independent Peripherals (CIPs), integrated touch support and a 12-bit ADC for mixed-signal and human-machine interface applications. The devices support operation from 1.8 V to 5.5 V, include Multi-Voltage I/O (MVIO) for interfacing with mixed-voltage systems and offer pin-to-pin compatibility with […]
Next-gen DSP boosts AI and audio processing on power-limited SoCs
The Tensilica HiFi iQ DSP from Cadence is a sixth-generation audio and voice DSP IP based on a new architecture designed for AI-enhanced audio processing in edge devices. The DSP delivers higher compute density and energy efficiency than prior HiFi cores, with support for AI data types such as FP8 and BF16, enhanced vectorization and […]
Entry-level AI MCU enables low-power edge inference on one chip
The NuMicro M55M1 AI MCU from Nuvoton Technology, developed in collaboration with the Industrial Technology Research Institute, integrates an Arm Cortex-M55 core with an Arm Ethos-U55 micro-NPU to deliver about 110 GOP/s for edge AI inference. The device includes up to 1.5 MB SRAM and 2 MB Flash with optional HyperRAM and HyperFlash expansion, enabling […]
Edge controller embeds into semiconductor manufacturing equipment
The OpreX™ Intelligent Edge Controllers – A8 from Yokogawa Corporation of America are Linux-based embedded controllers built on Ubuntu 24.04 with real-time patches, designed for deterministic control in advanced automation systems. The A8 introduces a data-centric “Data Stream” software architecture that decouples control logic from hardware, supporting reusable development with libraries for motion control, PID […]
Bluetooth LE module variants add memory and power configuration flexibility
The ISP2454-LX family from Insight SIP is a Bluetooth Low Energy module platform built on Nordic Semiconductor’s nRF54L15 SoC, combining an integrated antenna, BLE radio and onboard processing in a pin- and footprint-compatible design. The three variants share the same RF and processor core but scale features to match application needs, from the ISP2454-LL without […]
Embedded controller firmware adds authenticated boot and advanced power control
The MEC1723 embedded controller from Microchip Technology is paired with custom firmware to support system management in NVIDIA DGX Spark personal AI supercomputers, combining power sequencing and energy regulation with secure firmware authentication and ECC-P384-based cryptographic verification to establish a root of trust at boot. The firmware adds a DGX-specific packet-command host interface, plus EMI […]
XMC modules combine ARM cores and FPGA logic
The AcroPack FPGA XMC modules from Acromag integrate AMD Zynq UltraScale+ MPSoCs in an XMC form factor with PCIe connectivity, combining multi-core Arm processing and FPGA logic for real-time and compute-intensive workloads. The modules support high-speed I/O expansion and are designed for embedded computing, test and measurement and industrial control applications that require graphics processing, video encoding, […]
