ATP Electronics launches the A700Pi/E700Pi Series, a new generation of Premium Line pSLC NAND-based embedded SSDs. A game-changing highlight for this generation is a new ATP-developed firmware and supporting mass production infrastructure, which is fully customizable to endurance configurations that are tailor-fitted to customer’s requirements, to address any variety of embedded/industrial usage cases. This once […]
IoT
Software modem and reference design simplify design complexity for IoT apps
Semtech Corporation announced two new enabling solutions for its LoRa Edge platform: LoRa Basics Modem-E, a LoRaWAN-based software modem for the LoRa Edge platform that runs inside the LoRa Edge transceiver, and the LoRa Edge Tracker Reference Design, a device-to-cloud commercial-grade reference solution for asset tracking applications. LoRa Basics Modem-E, which forms part of […]
IoT data management software runs on BeagleBone platform
Digi-Key Electronics announced that it will be the exclusive global distributor of the industry’s most affordable ready-to-use IoT data management software for the BeagleBone platform, Machinechat JEDI One for BeagleBone. Machinechat’s JEDI One is an all-in-one software application for IoT developers and solution architects to provision IoT data collection, visualization, monitoring, and local storage capabilities in […]
Secured platform-enabled Wi-Fi MCU module pre-provisioned for cloud platforms
As the Internet of Things (IoT) expands beyond home automation and drives deeper into home control – including Heating, Ventilation and Air Conditioning (HVAC), garage doors, and fans – and grows in building and industrial automation, the need for highly integrated, reliable and secured Industrial IoT (IIoT) connectivity is greater than ever. Microchip Technology announced the […]
2.3 Mp CMOS image sensor delivers image clarity at 120 fps
ON Semiconductor has introduced the AR0234CS 2.3 Mp CMOS image sensor with global shutter technology. The high-performance sensor is designed for a variety of applications including machine vision cameras, AR/VR/MR headsets, autonomous mobile robots (AMRs), and barcode readers. The AR0234CS captures 1080p video and single frames operating up to 120 frames per second (fps). With […]
BLE chips drive first Wi-Fi 6-enabled gaming consoles
NXP Semiconductors N.V. announced it’s family of 2×2 Wi-Fi 6 (802.11ax) Dual-Band + Bluetooth/BLE solutions that are driving a new phase of connectivity innovation for advanced gaming, audio, industrial, and IoT markets. Enabling the world’s first Wi-Fi 6 enabled gaming console, NXP’s optimized IW62X family of products will provide increased capacity, efficiency, and performance for […]
RF module offers multi-protocol networking via Bluetooth 5.2/Direction-Finding /Mesh, Zigbee and Thread
Insight SIP is launching the ISP1907-HT RF module, which offers a huge range of capabilities in a tiny package. With its extended temperature range, it is ideal for Smart Lighting/Smart Building applications and includes Bluetooth Mesh, Zigbee, and Thread protocols to enable multimode networks. It also supports BLE direction finding, and contains a powerful microprocessor, […]
MCUs target IoT apps with crypto engine capability
Renesas Electronics Corporation announced the expansion of its RA6 Series microcontrollers (MCUs) with nine new RA6M4 Group MCUs, increasing the RA Family to 42 MCUs. These 32-bit MCUs boost operating performance up to 200 MHz using the Arm Cortex-M33 core based on Armv8-M architecture with Arm TrustZone technology. The RA6M4 MCUs deliver optimized performance together […]
Modules handle CBRS networks for private LTE IoT, broadband apps
Telit announced the availability of two new modules designed and built to support CBRS (Citizens Broadband Radio Service) networks in the USA. The modules are based on Sequans’ Cassiopeia LTE Cat 4/6 chipset technology and are optimized for the design of devices for private LTE IoT and broadband applications. The collaboration will benefit both companies […]
MIPI Debug for I3C v1.0 allows for efficient debug and test
The MIPI Alliance announced the public availability of MIPI Debug for I3C v1.0, a flexible and scalable debug and test specification for systems that enable 5G, the Internet of Things (IoT), automotive, and other applications. This new specification, built on the MIPI I3C v1.1 (and MIPI I3C Basic v1.0) utility and control bus, allows system designers to efficiently and […]