OmniVision Technologies, Inc. announced in advance of AutoSens Detroit the automotive industry’s first complete solution for dual-mode camera applications. This joint solution simultaneously monitors drivers while capturing vehicle occupants for one-way video conferencing. It features OmniVision’s automotive industry-first OV2312 image sensor, with a dual-mode global shutter that captures both RGB color images and IR images under low-light conditions. These […]
Reference designs
Chip design software works with 3-nm gate-all-around process technology
Synopsys, Inc. announced the release of the 3-nanometer (nm) gate-all-around (GAA) AMS Design Reference Flow, which provides designers a complete front-to-back design methodology for designing analog and mixed-signal circuits using the Synopsys Custom Design Platform. It has been optimized to provide maximum designer productivity for designers of advanced 5G, HPC, AI, and IoT applications using the Samsung 3nm […]
Reference design covers IO-Link transceivers
Modern smart factories need to quickly and remotely adjust a sensor’s electrical characteristics to minimize downtime and maximize throughput. The MAXREFDES177# IO-Link reference design from Maxim Integrated Products, Inc. demonstrates the flexibility of the MAX22515 IO-Link transceiver, seamlessly configuring all modes of the MAX22000 software-configurable analog IO. This chipset provides flexibility with faster reconfiguration to reduce factory downtime. Maxim Integrated’s […]
Health sensor kit cuts development time for wearables
Save at least six months of development time using the Health Sensor Platform 3.0 (HSP 3.0) from Maxim Integrated Products, Inc. Also known as MAXREFDES104#, this ready-to-wear wrist form factor reference design monitors blood oxygen saturation (SpO2), electrocardiogram (ECG), heart rate (HR), body temperature, and motion. Included algorithms provide HR, heart-rate variability (HRV), respiration rate […]
Open-source software, hardware advances autonomous applications with GNSS
Septentrio announces two important open-source resources for its GPS/GNSS module receivers. The first, ROSaic, is a ROS (Robot Operating System) driver for the mosaic-X5 module as well as other Septentrio GNSS receivers. The second project, mosaicHAT, is an open-source hardware reference design combining mosaic-X5 with a Raspberry Pi single-board computer. Both projects facilitate the integration […]
Raspberry Pi compute module 4 boasts smaller footprint, more memory
Newark launched the new Compute Module 4 (CM4) from Raspberry Pi. The CM4 brings the power of the Raspberry Pi 4 to the compute module family and is accompanied by two accessories, the Compute Module 4 I/O (CM4IO) Board and the Compute Module 4 Antenna Kit. CM4 is a faster and more powerful System on Module […]
CMOS sensors provide detailed imaging with up to 45 Mp
ON Semiconductor has expanded its XGS family of image sensors with high performance, low noise products that offer 12-bit image quality at a high frame rate. The new offerings include the XGS 45000, the XGS 30000, and the XGS 20000, which provide detailed imaging with up to 45 Mp for resolution critical applications and up […]
Software modem and reference design simplify design complexity for IoT apps
Semtech Corporation announced two new enabling solutions for its LoRa Edge platform: LoRa Basics Modem-E, a LoRaWAN-based software modem for the LoRa Edge platform that runs inside the LoRa Edge transceiver, and the LoRa Edge Tracker Reference Design, a device-to-cloud commercial-grade reference solution for asset tracking applications. LoRa Basics Modem-E, which forms part of […]
Automotive reference flow streamlines SoC design for ISO 26262 compliance
Synopsys, Inc. and Samsung Foundry announced the release of a validated automotive reference flow to streamline SoC hardware design for in-system test, implementation, verification, timing, and physical signoff for ISO 26262 compliance. This reference flow is targeted for automotive safety integrity level (ASIL) D autonomous driving and advanced driver-assistance systems (ADAS) applications. In close collaboration with […]
Online library of 10,000 reference designs support product development efforts
As one of the leading manufacturers of electronic and electromechanical components, Würth Elektronik has been working for years with top semiconductor companies, such as Analog Devices, Infineon Technologies, and Texas Instruments to develop reference designs to help customers accelerate their projects. Würth Elektronik offers access to this online library of more than 10,000 reference designs […]
