The MXM embedded GPU modules from ADLINK Technology are MXM 3.1 Type A and Type B accelerator modules based on NVIDIA RTX PRO™ Blackwell architecture for edge AI and graphics workloads. The modules support power configurations from 45 W to 150 W, deliver FP32 performance up to 49.8 TFLOPS, include up to 24 GB GDDR7 […]
EW 2026
Industrial SD cards deliver 4,000/2,000 read/write IOPS at the edge
The SANDISK® IX QD352 microSD™ card and SANDISK® IX LD352 SD card from Sandisk are industrial-grade removable flash storage devices built on BiCS8 TLC NAND technology for data-intensive edge systems. The cards provide capacities from 128GB to 256GB with endurance ratings up to 768TBW, A2 application performance with read/write IOPS exceeding 4,000/2,000 and V30 support […]
Edge AI platforms span 100 to 180 TOPS for industrial deployment
Innodisk is showing a range of edge AI platforms at Embedded World 2026 spanning enterprise inference, industrial vision, and supporting infrastructure. Highlights include the APEX-X200 system with NVIDIA Blackwell RTX 5080 for air-gapped on-prem inference, COM-HPC Mini modules on Qualcomm Dragonwing delivering up to 100 TOPS, and Intel Core Ultra Series 3-based systems reaching up to […]
Agentic AI workflows target C/C++ safety-critical test automation
The C/C++test and C/C++test CT automated testing platforms from Parasoft provide software test automation for C and C++ development in embedded and safety-critical systems. C/C++test CT integrates a TÜV-certified GoogleTest framework that supports functional safety standards including ISO 26262, IEC 61508, IEC 62304 and EN 50716, while agentic AI workflows enabled by Parasoft’s MCP server […]
COM-HPC v1.3 standard supports PCIe Gen6, boosts high-performance computing
The COM-HPC® Revision 1.3 specification from PICMG updates the Computer-on-Module standard with support for PCI Express Gen 6 and Compute Express Link (CXL), enabling higher data throughput and coherent connectivity for memory and accelerator resources in embedded systems. The revision also adds support for MIPI-CSI C-PHY, Modern Standby (S0ix) power states, expanded GPIO and I2S […]
Up to 12-core edge platform targets 10-year industrial deployments
Intel launched the Core Series 2 processors with P-cores at Embedded World 2026, targeting industrial edge applications that require deterministic real-time performance alongside AI workloads. The lineup spans 11 SKUs with up to 12 P-cores, 5.9 GHz turbo, 192GB DDR5-5600 with ECC, up to 16 PCIe Gen 5 lanes, and a 10-year longevity program, claiming […]
180 MHz MCU addresses variable-frequency drive applications
GigaDevice has launched the GD32M531 series 32-bit MCUs built on an Arm Cortex-M33 core running at up to 180 MHz, with integrated hardware accelerators for trigonometric functions and SVPWM to support field-oriented control (FOC) algorithms across dual motors plus PFC. The devices include 256KB Flash, 64KB Data-Flash, 32KB SRAM (both with ECC), two enhanced AD-Timers […]
120 MHz flash supports AI inference from data center to edge
GigaDevice has expanded its GD25UF series SPI NOR Flash to cover densities from 8Mb to 256Mb, operating at 1.14V–1.26V with a maximum clock frequency of 120MHz (STR mode) and data throughput up to 80MB/s. The series supports Single, Dual, Quad, and DTR Quad SPI modes, offers 100,000 program/erase cycles and 20-year data retention, and is […]
Hardware accelerator cuts inference energy by 120x in new MCUs
Texas Instruments has introduced two new MCU families at Embedded World 2026. The MSPM0G5187 and the AM13Ex both integrate TI’s TinyEngine NPU, a dedicated hardware accelerator that runs deep learning inference with up to 90x lower latency and more than 120x lower energy per inference compared to MCUs without an accelerator. The MSPM0G5187 is an […]
Open-source gateway adds MQTT for low-power mesh networks
The NeoGW gateway software from NeoCortec is an open-source multiplatform gateway that connects NeoMesh wireless networks with edge systems and cloud services using MQTT integration. The software works with a web-based Network Management Tool that allows administrators to monitor and manage individual networks or fleets from a central interface. Designed for IoT monitoring systems the […]
