TDK Corporation introduces the InvenSense T3902, the world’s lowest power Pulse Density Modulation (PDM) microphone for mobile, IoT and other consumer devices. The T3902 is an ultra-low power, low noise, multi-mode bottom-port MEMS microphone, enhancing voice-based services which are now commonplace in many devices and homes. The microphone offers an exceptionally efficient 185 µA ultra-low […]
tdkcorporation
Orientation sensor combines 3-axis gyroscope and 3-axis accelerometer
TDK Corporation announces the availability of the InvenSense ICM-42688-P high-performance motion sensor, a 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer in a 2.5mm x 3mm x 0.9mm package. The device enables high-precision motion-sensing applications such as robotics, wearable devices, drones, and many other IoT devices. Compared to traditional consumer-grade […]
Gyroscope/accelerometer combo enables high-precision motion sensing
TDK Corporation announces the availability of the InvenSense ICM-42688-P high-performance motion sensor, a 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer in a 2.5mm x 3mm x 0.9mm package. The device enables high-precision motion-sensing applications such as robotics, wearable devices, drones and many other IoT devices. Compared to traditional consumer-grade […]
Fault-tolerant inertial measurement unit targets industrial apps
TDK Corporation launches a new high performance and fault-tolerant InvenSense inertial measurement unit (IMU) family targeted at industrial applications. The new products, IIM-46234 and IIM-46230, include multiple 6-axis sensors, each of which can measure three dimensions of linear acceleration and three dimensions of rotational rate. With its ability to take precise measurements in harsh environments characterized by […]
Dev kit helps integrate sensors onto robotic platforms
TDK Corporation announces RoboKit, a new development kit that enables seamless integration of solutions from TDK’s portfolio designed for the robotics market. RoboKit integrates key TDK offerings such as InvenSense ICM-42688-P 6-axis IMU, InvenSense ICP-10111 capacitive barometric pressure sensor, InvenSense ICS-43434 multi-mode digital microphone, Chirp CH-101 and CH-201 ultrasonic ToF sensors, and Micronas motor controller, angle sensor, and position sensors. […]
Haptic feedback eval kits help wring out piezo actuators
TDK has announced two evaluation kits that provide an initial impression of the varied possibilities of haptic feedback that can be realized with PowerHap piezo actuators. The BOS1901-Kit development kit is designed for and includes three 60 V actuators. The ordering code for the kit is Z63000Z2910Z1Z44. The board is based on the CapDrive™ driver […]
Ultrasonic 6-DoF position and orientation tracking controller for VR apps
TDK Corporation expands its Chirp Microsystems ultrasonic product portfolio with Chirp SonicTrack, an ultrasonic six-degree-of-freedom (6-DoF) controller tracking solution for all-in-one (AIO) virtual reality (VR) systems. Chirp SonicTrack is an inside-out tracking system that fuses ultrasonic and inertial sensor data to provide 6-DoF position and orientation tracking of a hand-held controller with sub-millimeter precision over […]
Sensor array targets next-gen virtual reality apps
TDK Corporation announced the launch of a complete portfolio of VR sensors enabling a new class of highly accurate and affordable all-in-one VR solutions. The key platform components are: InvenSense ICM-42688 6-axis motion sensor for HMDs provides the lowest noise figure in the industry and features the only high-resolution measurement mode, enabling the measurement of VR headset […]
Programmers handle magnetic Hall effect sensors
TDK Corporation expands its tool chain for the easy programming of various Micronas Hall-effect sensors with the Magnetic Sensor Programmer MSP V1.0. It replaces the APB 1.5 and complements the existing programmer line, which comprises the USB-Programming Kit V1.01 and the HAL APB V5.1. These programmers are specially designed for use in the development laboratory. TDK now offers three […]
Angle sensors boast only ±0.05 ° error at room temperature
TDK Corporation is expanding its portfolio of TMR angle sensors with the TAD2140 type in a TO-6 package for automotive and industrial applications. The new sensor provides an innovative system-in-package solution for PCB-less applications. It includes two full TMR bridges, a dedicated ASIC for signal conditioning and integrated passive components. Like all of TDK’s TMR […]
