At Embedded World 2026, March 10 – 12, Nordic Semiconductor will showcase its three-series cellular IoT portfolio expansion. The nRF92 Series integrates an application MCU, Nordic’s Axon NPU for edge AI, multi-constellation GNSS, Wi-Fi locationing, and sensor co-processing in a single package, targeting smart meters, trackers, industrial sensors, and wearables with multi-year battery life. General […]
Wireless
Module adds wireless communications to embedded systems
The EnOcean 5 Click™ from MIKROE is a wireless connectivity Click board™ based on the EnOcean TCM 615 radio transceiver gateway module, providing bidirectional communication for EnOcean sensors, switches and actuators. Operating at 868.3 MHz using EnOcean Serial Protocol 3 (ESP3) and EnOcean Radio Protocol 1 (ERP1), it integrates a 50Ω PCB antenna, supports UART […]
Supported Zephyr SDK targets wireless IoT
The Simplicity SDK for Zephyr from Silicon Labs is a downstream, fully supported distribution of the Zephyr RTOS optimized for Silicon Labs wireless platforms. The SDK combines Zephyr’s modular RTOS architecture with validated wireless stacks, drivers, and consistent behavior across Series 2 devices, providing a predictable and production-ready software path for long-lifecycle IoT products. Initial […]
Low-voltage BLE SoC targets glucose monitors and biosensor wearables
Nordic Semiconductor has introduced the nRF54LV10A, a Bluetooth LE system-on-chip designed for low-voltage, space-constrained healthcare wearables such as biosensors and continuous glucose monitors. The device operates from a 1.2 V to 1.7 V supply range and can be powered directly from a single silver-oxide coin cell, supporting compact power architectures for body-worn designs. The nRF54LV10A […]
Compact PCI Express Mini Card provides simultaneous analog input and output
ACCES I/O Products, Inc. has released the mPCIe-DAAI16-8F, a multifunction analog input/output module for embedded and OEM systems. The unit fits the PCI Express Mini Card (mPCIe) Type F1 form factor and provides 16-bit precision with simultaneous analog input and output capabilities. It includes eight analog outputs that support both voltage and current operation and […]
Platform supports Bluetooth 6.0 and 802.15.4 protocols simultaneously
Microchip Technology has released the PIC32-BZ6 MCU, a single-chip wireless platform that supports Bluetooth Low Energy, Thread, Matter, and proprietary protocols. The device consolidates multiprotocol connectivity, analog peripherals, touch sensing, and graphics functions on a single chip to reduce component count for connected device applications. The MCU includes 2 MB flash memory and 512 KB […]
High-memory wireless controller eliminates external memory requirements
Nordic Semiconductor announced the launch of the nRF54LM20A, the latest addition to its next-generation nRF54L Series of ultra-low power wireless SoCs. Built on Nordic’s innovative 22nm technology platform, the nRF54L Series simplifies design challenges while enabling reliable communication, extended battery life, and compact product designs. The nRF54LM20A expands the nRF54L Series with a high-memory option, […]
IoT module combines MCU, Zigbee, and Bluetooth
Quectel Wireless Solutions has announced the launch of its latest high-performance MCU Zigbee and BLE module, the KCMA32S. This innovative module is designed to meet the growing demands of IoT applications, featuring advanced connectivity options and a compact form factor. Powered by Silicon Labs’ ultra-low-power EFR32MG21 wireless SoC, the KCMA32S module supports Zigbee 3.0 and […]
Multi-gigahertz clocks boast LVDS, CML, LVPECL output options
Mixed Signal Devices has announced its MS11X0 oscillator and MS15X0 jitter attenuator families for computing and communications systems. The timing devices are built on 28 nm CMOS technology and incorporate the company’s Virtual Crystal architecture to address requirements in AI data centers, 5G base stations, and radar applications. The MS1130 and MS1150 oscillators operate at […]
Wireless microcontrollers get antenna impedance matching and filters
STMicroelectronics has released a set of antenna-matching companion chips for STM32WL33 wireless microcontrollers (MCUs) to simplify the development of IoT, smart-metering, and remote-monitoring applications. The new MLPF-WL-01D3/02D3/04D3 ICs combine impedance matching and harmonic filtering on a single glass substrate to optimize the main radio’s RF performance, leveraging proprietary integrated passive device (IPD) technology. Precision-engineered and housed […]
