The MIPI Alliance announced the first update to its publicly available, royalty-free, MIPI I3C Basic specification. Version 1.1.1 dramatically enhances the speed and flexibility of I3C Basic, simplifying the development of innovative designs for products such as smartphones, wearables, and systems in automobiles and server environments. As the successor to the legacy I2C interface, MIPI I3C/I3C Basic provides a […]
Wearables
Cryptographic controller targets low-power-use applications
Analog Devices, Inc. unveiled the ultra-low-power MAXQ1065 cryptographic controller featuring its proprietary ChipDNA physically unclonable functionality (PUF) technology, which offers the strongest protection for edge-to-cloud Internet of Things (IoT) nodes, including medical and wearable devices, against invasive security attacks. The security co-processor provides 30x lower power when compared to similar products and its extended lifetime and […]
Industrial CMOS vision sensors carry 2 MP, 1.5 MP resolution
Teledyne e2v has introduced its Topaz series of industrial CMOS sensors with new 2MP and 1.5MP resolution devices. These new 1920 x 1080 and 1920 x 800-pixel format sensors use state-of-the-art low noise, global-shutter pixel technology to offer powerful solutions and enable compact mobile designs for many applications. Housed in a tiny 4.45 mm wide Chip […]
Thin-film common-mode filters for mobile devices
TDK Corporation has developed the TCM0403M Series of miniaturized thin-film common-mode filters for mobile devices. The 0403 case size (0.45 x 0.3 x 0.23 mm) is 58 % smaller and 56 % lighter than previous products. With their high common-mode attenuation characteristic, these products reduce intruding noise and improve wireless signal reception sensitivity. The common-mode […]
hand-held camera cube reference design enables AI at the edge
Maxim Integrated Products, Inc. unveiled the MAXREFDES178#camera cube reference design, which demonstrates how Artificial intelligence (AI) applications previously limited to machines with large power and cost budgets can be embedded in space-constrained, battery-powered edge devices. The MAXREFDES178# enables ultra-low-power internet of things (IoT) devices to implement hearing and vision and showcases the MAX78000 low-power microcontroller with neural […]
Air quality gas sensor module enables ultra-low power ozone measurements
Ozone gas is a significant cause of poor outdoor air quality that poses health risks. The enhanced ZMOD4510 is the industry’s first fully calibrated, miniature digital Outdoor Air Quality sensor solution with selective ozone measurement capabilities, offering visibility into the air quality in users’ immediate environments for a personalized experience. The ZMOD4510’s ability to quantify […]
SoC/RAM combo targets IoT hi-rez display apps
Winbond Electronics Corporation announced a collaboration to combine HyperRAM and Apollo4 to deliver ultra-low-power system solutions for IoT endpoints and wearables. Several customers are in design with Ambiq’s Apollo4 SoC and Winbond 256Mbx8 HyperRAM Hybrid Sleep Mode (HSM), with volume production expected in 2022. HSM power consumption is about 50% if comparing to normal standby […]
Haptics interface brings touch control to smartphone sides
The new NexusTouch sensing and localized haptic platform from Boréas Technologies allow designers to expand touch-based user interfaces on the sides of smartphones and gaming phones. The platform enables seamless context-sensitive swipes, taps, and clicks—all while delivering rich haptic feedback. Blending advanced gesture sensing with localized haptics, NexusTouch supports a range of new use cases, from finger-clicks that […]
Low-voltage CMOS clock oscillators target battery powered designs
Today, billions of electronic devices are developed to suit consumer needs. As technology evolves, devices need to run at lower and lower voltages and this means that systems may need to have multiple supply rails. Because of this IQD, a subsidiary of the Würth Elektronik eiSos Group has produced a range of frequency products that […]
Haptic engine module manages piezo actuators in space-constrained applications
Boréas Technologies unveiled the Boréas Piezo Haptic Engine (Boréas PHE), the first module to harness the high performance of piezo actuators to solve wearable devices’ most significant challenge—achieving true high-definition (HD) haptic feedback in a broad range of low-power space-constrained devices. The Boréas PHE is a major advancement over the two legacy technologies that have dominated haptics in […]
